Eight output ports, controlling up to 8192 pixels. Each port can control a maximum of 1024 points. The SD card supports FAT32 and FAT16 formats, and allows up to 64 DAT files.<br>Multiple synchronization control can be achieved through a local area network. You can switch files by sending UDP instructions to network port 2, or obtain the current playing file number, etc.<br>Can connect to the DMA console, supports RGBW, can replace files, adjust speed and brightness, and has fast response time. Supports the Art Net protocol and can directly use software that supports Art Net such as and .<br>Support encryption function for limiting the number of power cycles. Supports addressing of the DMA chip, with built-in counting and internal control testing functions.<br>It can be connected or disconnected, and can be directly connected to a computer network card, router, or main controller. Supports online firmware<br><br>Currently, the driver chips that can be controlled include for DMX512, HDMX, APA102, APA102-65536, WS2801, WS2811, WS2812, WS2812, WS2813, TM1812, TM1809, TM1804, TM1923, TM1934, TM1925D, TM1926D, TM1803, TM1814, TM1913, TM1914, TM1926, UCSUCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, UCS8904, UCS5603, UCS9812, UCS2603, SK9816, SK6816 12. SM16716, SM16703, SM16709, SM16712, SM16704 SM16714, LPD6803, LPD8806, LPD1882, LPD1889, LPD1883, INK1003, APA104, P943, LC8812, GW6205, QED3110, D9866E, D9866B, D9865C, D9865E, D9865F, D9864B, D9864C, MBI6023, MBI6024, ADT6610, TLC5971, JCS0104, etc.<br>LD1510, LD1512, LD153X (only supports 8bit mode)<br>The supporting software is "LED Programming Software" V4.47 and above.<br>Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on.<br>Voltage:AC220V<br>Type:H807SA<br>Colour:Black<br>Material:Aluminum alloy<br><br>Package Contents:<br>1 * WiFI LEDpixel controller<br>1 * Card<br><br>Only the above package content, other products are not included.<br>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.