Plaster gun with cup and 3 nozzles Indispensable for all your renovation and plastering work: The air pressure required for spraying comes from the compressed air supply. This gun is perfectly suited to large work surfaces. A large, robust plastic funnel offers sufficient capacity to easily and effortlessly spread materials such as plaster, plastic masses, woodchip wallpaper, reinforcement plaster, quartz sand plaster up to 6 mm, dry quartz up to 8 mm, plaster, interior and exterior plaster. The plastic cup has a practical handle and has a capacity of 6 liters and is equipped with a half-moon-shaped opening (slot). This means that the device can also be operated in a slightly inclined position, allowing you to achieve clean and neat plastering results on walls and ceilings.The pneumatic plaster gun with cup should be used with a pressure of 4-8 bar. We recommend using a compressor with an air volume of at least 200 l/min, the required air volume is between 227 and 396 l/min. The plaster gun has a compressed air connection of 13.2 mm (). An air shut-off valve allows the adjustment of the air pressure. A solid, ergonomically shaped handle with a long trigger allows you to easily and comfortably guide the gun. The versatile plaster gun is equipped with 3 interchangeable nozzles: 4.6 mm (3/16), 6.3 mm (1/4) and 8 mm (5/16). The plaster gun can be disassembled and easily cleaned.