WUPP CSZH-983F2 1 Pair ATV Heated Handlebar Grips 3 Temperature Electric Heated Handle •The handlebar heated grips adopt 3 different temperature regulation controls. Green represents the low temperature of 40℃,blue represents the middle temperature of 50℃,and red represents the maximum temperature of 60℃. Helps you heat up quickly,and you can adjust the temperature suitable for you according to your needs •Suitable for most 12V (22mm) handle ATVs,just take off your previous handle and install a new heating handle without any modification •The handle is designed with anti-skid treatment and frosting,making you safer when driving •The built-in 5A fuse piece will automatically disconnect when the handle has problems,so you can use it with ease •The red wire is connected to the positive pole "+",and the black wire is connected to the negative pole "-". Please confirm before connecting,do not reverse the connection Specifications: •Product Model: CSZH-983F2 •Net weight: 258g •Material: Nitrile material •Suitable pipe diameter: 22mm •Input voltage: DC 12V •Power: 35W red light,25W blue light,17W green light •Handle type: Sealable/passable electric handles •Switch type: Multi-range adjustable temperature control switch •Applicable models: 12V ATV with a handle diameter of 22mm •Operating Instructions: •1. Energized: red light,blue light,green light each flashes once and then goes out. •2. Working status: indicator light is always on (high: red light is always on,medium: blue light is always on,low,green light is always on). •3. Long press on the key for 3 seconds: shutdown. •4. Click the key: switch the gear. •How to Use the Switch: •long press 3 seconds to start,bright red breathing light,after reaching the temperature will automatically become blue,lightly press a blue light temperature for the temperature of the temperature,lightly press two green,the temperature is low,press three for the red three high temperature,long press 3 seconds to turn off the machine. •Installation Instructions: •1. Remove the original handlebar. •2. Wet the inside hole of the left handlebar with soapy water,and do not twist it too much when installing. •3. power cord,red line to the positive pole,black line to the negative pole,please confirm and then connect,do not connect the reverse. •Notes: •When installing the left handle,do not twist the handle too much,or will cause the electric wire to shift. Package included: •1 Pair x ATV Heated Handlebar