Two-pack three-phase BLDC motor drivers compatible with DC6-24V applications.

Operating Voltage: 6-20V (maximum 24V) Drive Current: Rated 30A (up to 50A with air cooling) Maximum Power: 1000W Overcurrent Protection: Yes Stall Protection: Yes (current automatically reduces and intermittent operation) Overtemperature Protection: Yes (power halved when overheated) Maximum Speed: 224000 RPM (2-pole motor), 74000 RPM (6-pole motor), 40000 RPM (12-pole motor), 35000 RPM (14-pole motor) Model: Motor Drive Board Precautions: 1. Reversing the positive and negative terminals of the power supply may cause permanent damage to internal components. 2. The output terminal has overcurrent protection during normal operation. Due to the high power and current, do not short-circuit the module in case of a fault. Short-circuiting may damage components. For initial testing, use low voltage and low current. After confirming normal function, use higher voltage and current. Ensure good insulation of wiring connections. Avoid direct contact with circuit board components. 3. Do not connect motors exceeding the module's rated voltage, current, or power to avoid accidental damage. Color: As shown in the picture. Material: PC + plastic. Package contents: 2 x DC 6-24V 1000W three-phase brushless motor drivers (appearance may vary from batch to batch, but this does not affect function). Only the above items are included; other accessories are not included. Note: Light and monitor settings may cause slight color differences between the picture and the actual product. Measurement error is allowed within +/- 1-3 cm.