TSPZEM‑031 Voltmeter Ammeter DC Multi‑Function Digital Display LCD Current Meter Tester Detector

₩39,490
무료 배송

TSPZEM‑031 Voltmeter Ammeter DC Multi‑Function Digital Display LCD Current Meter Tester Detector

  • 브랜드: Unbranded

TSPZEM‑031 Voltmeter Ammeter DC Multi‑Function Digital Display LCD Current Meter Tester Detector

  • 브랜드: Unbranded
희망소매가격: ₩57,490
가격: ₩39,490
절약 금액: ₩18,000 (31%)
판매자::
₩39,490
무료 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Features 1、Measuring function of electrical parameters (voltage, current, power, electric quantity). 2、Voltage alarm function (over voltage alarm threshold, backlight and power flicker prompt). 3、Power button reset function. It is designed to adapt to a poor light situation. 4、Power off data saving function, prevents from data losing when the power's off. 5、Full display function of large‑screen LCD (display voltage, current, power and power at the same time). Specification Condition: Brand New Material: ABS Working Voltage: 6.5~100VDC Rated Power: 20A / 2000W Measurement Accuracy: Level 1.0 Display and Button Display Interface: The large LCD screen displays the voltage, current, power and power parameters simultaneously. Display Format: 1. Power: Test range 0~2kW The display format within 1kW is 0.0~999.9W; The display format above 1kW is 1000~2000W. 2. Electricity: Test range 0~9999kWh The display format within 10kWh is 0~9999Wh; The display format above 10kWh is 10~9999kWh; Display format 6.50~99.99V 4. Current: Test range 0~20A The display format is 0.00~20.00 Button: 1. Control of the backlight The backlight can be turned on or off by short pressing the button, and the poor light state is automatically saved when the power is turned off. 2. Reset the battery Step 1: Press and hold the button until the ''CLr'' character is displayed in the power display area, and then release the button; Step 2: At this time, the battery flashes to indicate that the battery is currently reset. If you press the button again for a short time, the power data is cleared and reseted and flashing; Step 3: If there is no pressing operation within 5 seconds, it means that the power data is not reseted and exits the reset state. Step 1: Press and hold the button until the ''SET'' character is displayed in the power display area, and then release the button; Step 3: After setting, press and hold the button until the screen displays ''PASS'' character to indicate that the setting is successful and automatically exits the setting state. Package List 1 x DC Current Voltage Meter 1 x Instruction Manual
  • 브랜드: Unbranded
  • 카테고리: 센서
  • Fruugo ID: 342818117-751288374
  • EAN: 6117160127899

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

배송 및 반품

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 월 27 10월 2025–금 31 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기