Item Type: Tripod Selfie Stick with Light Material: Stainless steel + ABS Rod Length: Approx. 98cm / 38.6in(the selfie stick is stretched to the longest, and the black stick at the bottom can be stretched) Operation Method: 1. Connect the Bluetooth remote control to the mobile phone; 2. Enter the camera that comes with the phone or download other camera APP software; 3. Switch to the video interface; 4. Click the remote control button to record video; 5. Click the button again to end the video recording. Instructions for Use of Fill Light: 1. Click, low brightness, press again, high brightness, press again to turn off the light; 2. The indicator light is red when charging, and the light is off when it is full. Fill Light Battery: Battery Type: Polymer lithium battery Battery Model: 401020 Battery Capacity: 55mAh Full charge time is about 45-55 minutes Fullcharged, high-brightness working time is about 35-40 minutes Fullcharged, low brightness working time is about 78-90 minutes The Charge and Discharge Protection Function of The Fill Light Battery: Fullcharge 4.2V, the voltage drops to 3V and stop working. It can be used after charging to support working while charging. Remote Control Built-in Battery: Battery Model: CR1620(without) Battery Capacity: 70mAh Voltage: 3V Instructions for Use: 1. Long press the switch for 3 seconds to turn on. 2. Long press the switch for 3 seconds to shut down. 3. After booting, there is no pairing connection status, and it will automatically shut down after 5 minutes. 4. Turn on the phone's Bluetooth to search for the Bluetooth device name VIP, click Connect, after the successful pairing connection, the indicator light is off, no operation, after 10 minutes, it will disconnect and enter the dormant state, and there will be no operation after another 10 minutes, shut down. 5. After entering the sleep state, press the button to connect to the mobile phone. 6. Turn off and on again, the phone and remote control that have been paired can automatically communicate with each other. Solution the Problem of Failure of Remote Control to Connect to Mobile Phone: 1. Turn on the bluetooth of the mobile phone and remove some of the devices that have been paired. 2. Turn off the phone and restart it. 3. Remove the back cover of the Bluetooth remote control, take out the battery, reinstall it, and turn it on again. 4. Turn on the phone's Bluetooth again to connect. Size: Approx. 19.4cm / 7.6in 4.4cm / 1.7in .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }