TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

₩82,290
무료 배송

TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

  • 브랜드: Unbranded

TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

  • 브랜드: Unbranded
희망소매가격: ₩100,290
가격: ₩82,290
절약 금액: ₩18,000 (17%)
판매자::
₩82,290
무료 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Features WS55-220 is a high performance,cost-effective 3 phase BLDC motor controller.Voltage range is from 20VDC to 50VDC. The controller can drive the DLDC motor with HALL or without HALL. The driver is based on advanced technology and be provided with high speed, high torque, low noise, low vibration, over current protection, overload protection, less phase line. protection, phase line short protection, alarm output, speed signal output. This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc. External potentiometer control/external voltage control.With overvoltage protection, over-current protection, locked-rotor protection. Specifications:Rated voltage: 20 to 50 VDC Rated current: 12A Current limiting: 15AMaximum speed: 20000RPM( the specific speed depends on the motor itself and load)Storage temperature: -20℃~+65℃ Usage environment: Avoid direct contact with dust, fumes and corrosive gases Temperature: 0-45℃ Humidity: < 80%, no frost, frost free Shock: 5.9m/S2 Maximum Storage humidity: 0~95%RH Size: Approx. 9.5 x 6 x 3.5cm / 3.74 x 2.36 x 1.38inch Weight: 258g Detail:1.Two modes of speed regulation: External potentiometer: through this potentiometer speed regulation; External voltage: external 10VDC voltage speed regulation; Note: The two speed regulation can not be used simultaneously2. Speed output PG signal: There is a 5v-revolution pulse output between the port and the ground. The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*N/60. 3. Alarm output ALM signal:There is an 5V alarm pulse output between the port and the ground. 4. Positive inversion function:F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally. Package included:1 x Motor Driver Controller with cable Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List
  • Fruugo ID: 397644258-848044991
  • EAN: 9789622485075

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
재료: As shown in the figure

배송 및 반품

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 월 13 10월 2025–금 17 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기