Features CORROSION RESISTANT: Made of good quality aluminum material, corrosion resistant, no rust, with good strength. GOOD AIR TIGHTNESS: Pneumatic manifold air distribution block is easy to install, no air leakage, possess good air tightness. WIDELY USED IN ENGINEERING PROJECTS: Widely used in engineering projects such as factories, automation equipment, auto repair, electronics and electrical engineering. HIGH PRESSURE RESISTANCE: Working pressure from 0~0.9Mpa(0~0.92kfg/cm²), pressure resistance is 1.0MPA (10kgf/cm²), possess high pressure resistance. FOR AIR PUMPS: Air coupler fast connector is used for compressors, air pumps and some machines, etc., very practical. Specification: Item Type: Pneumatic Manifold Air Distribution Block Material: Aluminum Pressure Resistance: 1.0MPA(10kgf/cm²) Working Pressure: 0~0.9Mpa(0~0.92kfg/cm²) Adaptation Temperature: 0~60℃ModelTotal Length(approx.)Positions/HolesLength x Width(approx.)Main Air PipeBranchBranch Center Hole DiameterMounting Hole DiameterVertical Mounting Hole Center SpacingHorizontal Mounting Hole Center SpacingSY30-02-3F106mm / 4.17in3 Position 5 hole30 x 30mm / 1.18 x 1.18inG1/2 (approx.20mm / 0.79in)G1/4 (approx. 12mm / 0.47in)Approx.32mm / 1.26inApprox.5.2mm / 0.2inApprox.20.5mm / 0.81inApprox.32mm / 1.26inSY30-02-4F138mm / 5.43in4 Position 6 holeApprox.64mm / 2.52inSY30-02-5F170mm / 6.69in5 Position 7 holeApprox.96mm / 3.78in Package List:1 x Pneumatic Manifold Air Distribution Block Note:1. Do not unplug and insert the air pipe frequently during the use of the connector, which will affect the service life of the connector and air pipe.2. The pipe inserted into the joint needs to be inserted to the bottom of the joint to avoid the possibility of air leakage.3. When pulling out the air pipe, first confirm that there is no pressure in the tube, press the end cap of the joint to the end and pull out the air pipe. Package List 1 x Pneumatic Manifold Air Distribution Block