The XDS100v2 emulator is the second version of the XDS100 JTAG emulation technology and supports chip debugging for TI.Support USB2.0 high-speed interface, theoretical to 480M/s, through the 14PIN interface for simulation debugging,Code Composer Studio (CCS) V4, V5,V6,V7,V8,V9,V10 and later is supported.It can be used in Windows 2000, XP, Vista, WIN7/8, WIN10 and other operating systems.The XDS100V2, which follows the official scheme, has the same performance in terms of speed and compatibility. The supported devices are the same.<br><br>Features Support for the following processor cores: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM R4, and ARM A8. Debugging function(connect / disconnect, read / write memory, read the register, load the program, run, stop steps to support the breakpoint debugging, real-time mode) Supports On-Chip Flash Programmer(e.g. C2000) Support targets with 14-pin TI JTAG connector as used by embedded processors. Support for USB2.0 High Speed (480 Mbit/s) Support for Code Composer Studio v4 and newer (Does not support Code Composer Studio v3.3) Support CCS5.2 Support for power-off test and Adaptive Clock Support for /Win7 Material: abs colour: As shown<br><br>Package Contents: 1 set x DSP emulator<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.