Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

₩13,590
+ ₩10,049 배송

Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

  • 브랜드: Unbranded

Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

  • 브랜드: Unbranded
희망소매가격: ₩27,190
가격: ₩13,590
절약 금액: ₩13,600 (50%)
판매자::
₩13,590
+ ₩10,049 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

brand new and high quality Features: White thixotropic elastomer.Good cold and hot tolerance.No peeling and good disassemble after long for time usage. Excellent in cold and high alternating resistance.It has great adhesion,insulation and dissipation. You can use it to get more reliable filling heat,simpler process and more economic cost. It is mainly used in range of fill, bond, and seal in electronics,the for gap between CPU and radiators,the filling of high-power electronics modules and radiators,etc. Thermal Conductive Silicone only, other accessories demo in the picture is not included! Specification: Temperature: -60~280 degrees Material: Silicone Rubber Dimensions: 13.2x3.9cm/5.2x1.54inch Capacity: 80g Color: White Quantity: 1 Pc Note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Thermal Conductive Silicone How To Use: Preparation:Clean the un-bonded or uncoated surfaces by removing the rust, ash, and oil, etc. Application:Pierce the opening with the tip of the cap. Fix the nozzle, and coat the clean surface evenly with the adhesives, then bond the two surfaces. Curing Condition:The curing progress is from outer surface into inner surface.The elastomer get cure with the depth of 2~4mm in 24 hours (at room temperature, 55% moisture). if the bonded parts is too deep (especially the parts not easy to contact with air) or the temperature is too low, the full curing for time will be extend. Advise user preparing enough for time to let elastomer get full cure in order to keep the properties stably. Tips:After the application,screw its nozzle tightly and store in dry and cool place for next for time using.There may be some cured gel around the opening when you use it again,just remove the cured,and use the uncured. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-Minnanxin
  • Fruugo ID: 409564215-867314257
  • EAN: 6092010843665

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Not suitable for children under 36 months
재료: Plastic 5%

배송 및 반품

24시간 이내에 발송됨

  • STANDARD: ₩10,049 - 배달 사이 수 22 10월 2025–목 30 10월 2025

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • Minnanxin 03
  • Putian Minnanxin Trading Co., Ltd.
  • Room 2402, Building 11, Area B, Oushi Lingxiu, No. 333 Huaxiu Road
  • Longqiao Subdistrict, Chengxiang District
  • Putian
  • CN
  • 351100
  • nanxinmin01@outlook.com
  • 8615260999837

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • IBERTRUST GLOBAL SOCIEDAD LIMITADA
  • IBERTRUST GLOBAL SOCIEDAD LIMITADA
  • C/ PABLO IGLESIAS 1A ENTRES
  • Castellon De La Plana
  • ES
  • 12001
  • contact@ibertrust.info
  • 0034 964818867