TempU05 Temperature Data Logger PDF Report Disposable USB Temperature Data LoggerOOTDTY TempU05 Temperature Data Logger PDF Report Disposable Temperature Data Logger USB Temperature Data LoggerFeature:1. Widely used for monitoring food, medicines, chemical products and other transportation and storage processes.2. When the recording is done, you can directly insert your computer to get the PDF report.3. Built-in USB connector, directly connect your computer or mobile phone, no cable or reader required.4. With high precision 0.5c and high sensitivity.5. It has a small and compact size, easy to carry.6. Wide range of temperature measurement, can store 10,000 data. Specification: Condition: 100% Brand New Item Type: Temperature Data LoggerMaterial: PlasticColor: As shown in the picture Size: About 67 x 28mm / 2.64 x 1.1 in (L x W) Weight: About 13g / 0.5oz Type: Single Use Log Interval: 10 minutes Accuracy: 0.5 C(-20 C - +40 C) Out of Range: 1 C Data Capacity: 10000Alarm Temperature Range: lt; 2C orgt; 8 C(lt; 35.6 F orgt; 46.4 F)Start Delay: 30minutesOperating Ambient Temperature: -30 C - +60 C Instructions:1. Press and hold the "Start/Stop" button for more than 3 seconds, the "OK" indicator will be on for 3 seconds, indicating that the device will start recording, and then you can put the device in the environment you need to monitor.2. During the recording process, the device will automatically light up every 10 seconds. If the normal indicator light (i.e., green light) is on every 10 seconds, it means that the device does not exceed the temperature during the recording process. If the alarm sensor (i.e. red light) is on every 10 seconds, explain that there was an excessive temperature during the recording process. Note: As long as there is an excessive temperature during recording, the green light will no longer be on.3. Press and hold the "Start/Stop" button for more than 3s, the alarm sensor (i.e. red light) will be on for 3s, which means the device stops recording. Recording will stop automatically when the device is full. After the device stops recording, it will not flash automatically. If the unit is over-hot during recording, press the " Start/Stop " button. If the normal indicator (green light) is on, it means that the temperature is not re-registered during recording; If the alarm is when the indicator light (i.e., red light) is on, it means that the temperature exceeds the temperature during recording.4. Take out the waterproof packaging of the bag and insert the device into the USB interface of the computer. During the PDF generation process, the normal indicator light (i.e., green light) and alarm sensor (i.e., red light) turn on. When a file is generated, the normal indicator light (i.e., green light) will remain lit until the recorder is removed from the computer. Package List:1 x Temperature Data Logger Note1. Please allow 1 - 2cm error due to manual measurement. Thank you for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.3. Do not disassemble the packaging. Before testing, turn on the device, press Start, and the light will be on for 10 seconds, indicating that the product is good, And it will start recording after 30 minutes of power on (do not press STOP and connect the computer, press stop (Do not press STOP if you do not want to record) and connect the computer, this product can no longer be used after one time.