Features 1、Excellent Performance: With 0.1℃ measurement accuracy, and 8 times measurement per second, this controller is able to provide with you valid data at anytime. 2、Power Function: This controller supports multiple thermocouple and resistance sensor output and alarm modes. 3、Dual Display: This controller possesses 2 display that the measured temperature and set temperature can be displayed at the same time. 4、Programmable: This temperature controller has 32 programmable steps for ramping, soaking and other logic operations. 5、Wide Application: This controller can be flexibly used in various industrial automation control scenarios. Such as printing, chemical industry, plastics, building materials, home furnishing, packaging, textile, food, metallurgy, etc. Specification Item Type: Temperature Controller Material: ABS Power Supply Voltage: DC 24V Input Signal: The four input signals are compatible, and the adjustment menu parameters can be switched at will. 1. Measuring Range of K Type Thermocouple: - 60 ℃ to 840 ℃ (Plus Cold End Compensation Temperature) 2. PT100 Measuring Range: - 50 to 450 ℃ 3. 0 to 10V Analog Input 4. 4 to 20ma Horizontal Analog Input Installation Dimension: Approx. 44 x 44 x 100mm / 1.73 x 1.73 x 3.94in Output Signal: Relay Output PID: Supported Communication: RS485 Baud Rate: 1.2K 2.4K 4.8K 9.6K 19.2K 38.4K Alarm Mode: 1. Upper and lower limit alarm 2. Positive deviation and negative deviation alarm 3. Alarm in the section 4. Alarm outside the section 5. No alarm Accuracy: Thermocouple: The greater of ± 1.5 ℃ or (± 0.2% FS) Platinum Resistance: The greater of ± 1 ℃ or (± 0.2% FS) Temperature Display: 0.1 ℃ Sampling Speed: 8 Times/Second Program Mode: Support Number of Program Segments: 32 Segments Application Scope: Printing, chemical industry, plastics, building materials, home furnishing, packaging, textile, food, metallurgy, etc. Package List 1 x Temperature Controller