Lightweight body, Mini Design; ABS plastic flame-retardant material casing, small and light, the interior is controlled by microchip, and the card reading effect is fast.Compliant with CCID; Compliant with PC/SC; Support IC/ID dual frequency replication; Driver-free, no need to download software installation; When connect the RFID Reader to the computer with the USB cable, then can find the software; Support UID FUID CUID UFUID IC semi-encrypted card, IC full encryption card; Has USB full speed interface; Two-color LED light prompt (red light is standby, green is working); Built-in buzzer "beep" sound reminderProduct Parameters:Interface: USB full speedWorking Voltage: 5V DCWorking current: 200mAStandby current: 50mANormal current: 100mASmart card support: For 13.56MHz IC type: UID FUID CUID UFUID IC Half-encryption, IC Full-encryption etc.Supported operating systems: Support Windows computer. Not support Linux, Mac.How to use the card reader?(1) Connect the device to your computer with the USB cable.(2) You can find and open the software on your computer.Read and write 13.56MHz IC, IC half encryption card, IC full encryption card:1. Place the card on the card reader and press "Card number" or "Start decoding" on the software.2. The software will scan and display the card number3. Place a writable UID (13.56MHz writable chip) on the card reader and press "Write Card" on the software.Colour: blackMaterial: plasticSize: 108x68x12mmPackage Contents:1x RFID Copier5x UID key fobs5x UID cards1x USB Cable