Stepper Motor Programmable Controller, Single Axis, 40KHz Output, 8-Digit Display

₩53,790
+ ₩7,999 배송

Stepper Motor Programmable Controller, Single Axis, 40KHz Output, 8-Digit Display

  • 브랜드: Unbranded

Stepper Motor Programmable Controller, Single Axis, 40KHz Output, 8-Digit Display

  • 브랜드: Unbranded
희망소매가격: ₩82,790
가격: ₩53,790
절약 금액: ₩29,000 (35%)
판매자::
₩53,790
+ ₩7,999 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Single Axes Stepper Motor Programmable Controller Features: Instruction features: arbitrary programmable (can achieve a variety of complex operations: positioning control and non-positioning control). Maximum output frequency: 40KHz (especially suitable for controlling subdivision drive). High output frequency resolution of which is as accurate as 1Hz. Multiple working status including automatic running state, manual running state, program editing state, parameter setting state. 8-bit digital tube display, manual/ automatic state display, run/ stop state display, step/ count value/ program display, edit program, parameter display, input/ output state display, CP pulse and direction display. Specification: Instruction Specification:Arbitrary Programmable. Max Output Frequency: 40KHz. Output Frequency Resolution: 1Hz Program Number:99 Input:6( Optoelectronic Isolation) Output:3( Optoelectronic Isolation) Continuous Displacement Range:-7999999~7999999 Working Status: Automatic running state, manual running state, program editing state, parameter setting state. Rise and fall curve:2(Optimized) Display Function:8-bit digital tube display, manual/ automatic state display, run/ stop state display, step/ count value/ program display, edit program, parameter display, input/ output state display, CP pulse and direction display. Automatic operation function: It can be edited, and the start and stop of automatic operation can be controlled by the panel key and the level of the terminal. Manual operation function: Adjustable position (manual click-to-move speed and click-to-move steps can be set). Parameter setting function: can set take-off frequency, speed curve, reverse clearance, manual length, manual speed, interrupt jump line number and return speed. Program editing function: can be inserted arbitrarily, delete modifiable program.The utility model has the functions of skip-line number, 0 data determination, ultra-long statement number and ultra-short judgment function. 0-return function: can automatically return to 0 in both directions. Programming instructions: a total of 14 instructions;technical support. External operation function: Through parameter setting and programming, external interrupt operation can be performed by adding switch on A operation and B operation terminal; The front panel diagram includes: 1. Eight digital tube display 2.6-way input status indicator light 3. Three-way output status indicator light 4. CP Pulse Signal Indicator 5. CW Directional Level Indicator 6. Buttons: There are 10 buttons, and most of them are compound buttons. They have different functions in different states.  The rear panel shows the terminal, including: 1. CP, CW and OPTP are the control lines of stepper motor drivers, which are connected to the corresponding end of the driver respectively. CP _ step pulse signal CW _ motor steering level signal Common positive end of OPTO _ first two signals The state of CP and CW corresponds to the indicator light on the panel respectively. 2. Start-up: The startup program runs automatically, equivalent to the start key on the panel. 3, Stop: pause the running program, equivalent to the stop key on the panel, and then start again, the program continues to run. 4, A operation and B operation is one of the main features of this controller: for stepper motor, we generally carry out quantitative positioning control, such as control motor at a certain speed to run a certain displacement this way is easy to solve, only the speed and displacement can be programmed.But there are still quite a number of controls that cannot be positioned in advance, such as the control stepper motor running in one direction from the starting point until it comes to a stop after a trip switch, and of course the reverse runs back to the starting point.For example, the stepper motor is required to run back and forth between the two circuit switches n times, and so on.In these operations, we do not know in advance the displacement of stepper motor specific value, and how should be programmed?This controller uses: "interrupt operation", which we call "A operation" and "B operation".Take "A operation" as an example, the workflow is: When the program is running, if the "A operation" again signal input, the motor to reduce speed stop, the program interrupted here, the program memorized the coordinates of the interrupt, the program jumped to the "A operation" entry address specified in the program to run the program. 5. Input 1 and input 2 by switching the input end. 6. Output 1, output 2 and output 3. 7. COM +, COM-I/ O switch quantity external power supply, this power supply is DC12V/ 0.3 A, COM + is positive end, COM-negative end, this power supply is provided by internal isolation of the controller. Input signal and output signal interface circuit: The "start-up", "shut down", "A
  • 브랜드: Unbranded
  • 카테고리: 센서
  • Fruugo ID: 407470997-863572436
  • EAN: 4631329770259

배송 및 반품

24시간 이내에 발송됨

  • STANDARD: ₩7,999 - 배달 사이 금 03 10월 2025–월 13 10월 2025

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • BantianjiedaoxiangjiaotangshequzhonghaogongyechengC2dongwuceng505
  • Longgangqu
  • Shenzhenshi
  • Guangdongsheng
  • China
  • 518000
  • Wallace22578@outlook.com
  • +8613084447403

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM.1.PLANTA 1,DERECHA.OFICINA3.Fuenlabrada.
  • Madrid
  • Spain
  • 28947
  • successservice2@hotmail.com
  • +34910602659