Stepper Motor Driver Easy Controller Pulse Pwm Singal Generate Controller

₩26,590
+ ₩4,049 배송

Stepper Motor Driver Easy Controller Pulse Pwm Singal Generate Controller

  • 브랜드: Unbranded

Stepper Motor Driver Easy Controller Pulse Pwm Singal Generate Controller

  • 브랜드: Unbranded
가격: ₩26,590
판매자::
₩26,590
+ ₩4,049 배송

현재 이용 불가

이 아이템이 언제 다시 입고될지 알 수 없습니다.

다음의 결제 방식을 사용하실 수 있습니다

설명

This stepper motor drive controller adds a function that can generates PWM signals, there is a jumper on the board, you can set the working mode, the default set is to generate pulse frequency signal. This controller has three kinds of high, medium and low frequency signals can be selected with a jump pin. 2 groups of power input design, but it can be used after connected to one group of power supplys. One is 15-160VDC power supplys. the other group is 5-12VDC. Motor forward and reverse as well as open and close can be controlled by the button. The speed of the motor can be controlled by adjusting the potentiometer to change the frequency. Features: This module is a pulse generating module that supplies the stepper driver as a signal. If you want to control the stepper motor, you also have to matching the driver to do so. This simple controller + stepper driver + stepper motor + direct current power supplys can form a simple set of control platforms. This controller adds a function that can generates PWM signals, there is a jumper on the board, you can set the working mode, the default set is to generate pulse frequency signal. This controller has three kinds of high, medium and low frequency signals can be selected with a jump pin, the frequency parameters are about: high of 5.8KHZ-127KHZ; medium of 590HZ-15.8KHZ; low of 82HZ-2.3KHZ. Frequency measurement: you can measure the PUL and common negative terminal (GND) two ports. 2 groups of power input design, but it can be used after connected to one group of power supplys. One is 15-160VDC power supplys. the other group is 5-12VDC. If powered by 5-12VDC power supplys, just positive connect to "5-12Volt input", if the power supplys is negative connection, please connect to "common negative end". Motor forward and reverse as well as open and close can be controlled by the button. The speed of the motor can be controlled by adjusting the potentiometer to change the frequency. Specifications: Name: Motor Drive Controller Material: printed circuit board Item size: 73 * 51 * 38mm / 2.87 * 2.01 * 1.50in Package size: 100 * 80 * 50mm / 3.94 * 3.15 * 1.97in Package weight: 43g / 1.52ounce Packing List: 1 * Motor Drive Controller
  • 브랜드: Unbranded
  • 카테고리: 반도체
  • Fruugo ID: 232501081-497189425
  • EAN: 648153181193

배송 및 반품

-1일 이내에 발송됨

  • EXPRESS: ₩4,049 - 배달 사이 수 22 10월 2025–월 03 11월 2025

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기