Stepper Motor Controller 1 Axes compatible withward Reverse CNC Control 2 Speed PWM Pulse Generator 6V?32V

Item Type: Stepper Motor Controller Model: DKC-1B Working Voltage: DC6V-32V Model: 1. Automatic Round Trip Mode: After the controller in this mode is triggered to start (touch the common terminal and the start input terminal), the motor will automatically move back and compatible withth between the compatible withward limit and the reverse limit. until the trigger stops the input. After the motor reaches the compatible withward limit or the reverse limit and stops, it will wait compatible with 0.2-6 seconds to start. (the time is adjusted by the delay potentiometer) 2. Single Trigger Mode: After this mode is triggered to start, the motor will run compatible withward and the motor will stop when it hits the compatible withward limit. If it is triggered again, the motor will reverse, and when it hits the reverse limit, the motor will stop. Trigger the starter motor again to repeat the cycle 3. Single Round Trip Mode: After this mode is triggered and started, the motor rotates compatible withward, stops when it hits the compatible withward limit, and then starts to reverse after 0.2-6 seconds, and stops when it hits the reverse limit. (the time is adjusted by the delay potentiometer) 4. Jog Mode: Connect the start end and the common end to run compatible withward, release to stop; the stop end and the public end connect reversely, release to stop (this mode does not support returning to the origin)