Stepper CNC Controller Motor Module Subdivision 42/57 32 TB6600 Driver Control
- 브랜드: Unbranded
판매자::
Stepper CNC Controller Motor Module Subdivision 42/57 32 TB6600 Driver Control
- 브랜드: Unbranded
현재 이용 불가
14일 반품 정책
판매자::
현재 이용 불가
14일 반품 정책
결제 방법:
설명
Stepper CNC Controller Motor Module Subdivision 42/57 32 TB6600 Driver Control
Feature:
1. Control signal input voltage is 3.3V‑24V general, 32 kinds of subdivision accuracy are optional.
2. H‑bridge bipolar constant current drive, input signal high‑speed optocoupler isolation.
3. Built‑in temperature protection and over current protection, automatic half current to reduce heat.
4. Motor noise optimization function, low noise, not easy to disturb the people.
5. Small size, easy to carry and store, convenient to use and with good performance
Specification:
Item Type: Driver Controller
Power Supply Voltage: DC 9-42V power supply (12-24V recommended)
Current: The output current can get 4.0A (suitable for 57, 42 stepper motors of 1.8NM and below)
Cooling Method: Natural cooling or forced air cooling.
Use Occasion:
(1) Do not place it near to other heat-generating equipment, avoid dust, oil, corrosive gas, excessive humidity and strong earthquakes.
(2) Combustible gas and conductive dust are prohibited.
Humidity: 40-90%RH
Vibration: 10-55Hz/0.15mm
Storage Temperature: -20-65℃
Package List:
1 x Driver Controller
Note:
- 브랜드: Unbranded
- 카테고리: 가변 주파수/조정 가능 속도 드라이브
- Fruugo ID: 486365082-1007749522
배달
3일 이내에 발송됨
중국에서 발송.
보고
당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다.