Controller - stair controller - 16 channels (degrees) - cascade lighting of stair lighting. 12-24V - 240W 2 PIR sensors Romantic atmosphere – very well suited for use at festivals, preparations for surprises and meetings. Step by step with the lighting of the stairs. It provides a sense of atmosphere, introduces a romantic atmosphere and contributes to the ceremony. The controller allows smooth lighting of stair lighting in degrees or next to steps. Usually these are LED tapes mounted in aluminum profiles. The kit consists of a controller, 2 PIR sensors, a connector for easy connection of power supply and a mounting kit. PIR sensors react to movement at the top or bottom of the stairs, when motion is detected, the lighting is smoothly lit. It takes place from the first to the last staircase, from the side of the detector that detected movement. Lighting of a single light is carried out gradually with the effect of brightening. [Sensitivity sensitivity] – turns on when people come in, turns off when people leave, no electricity is wasted, and the current is used where it should be used, the detection range is 1-3 m, and the detection angle is 120. The sensors can be mounted on the surface or in one plane. [Soft light] – there is warm white light and white light to choose from, it does not flicker, does not harm the eyes, soft LED diodes, more atmosphere. If you appreciate the lights with the stairs, the lights will not blind you and at this point you will destroy the beauty. [Clean and tidy] – The light strip can also be turned on during cleaning so as not to hide dust anywhere and the house will become more tidy and clean. Light tape can help you find dirt and dust more easily and make cleaning easier. Time can be set - you can set the lighting time, interval time, light brightness and step lighting mode as desired to create unique lighting levels and convey the most unique feelings to people you like. and leave the deepest memories to yourself. Functions: Cascading lighting and extinguishing stair lighting. Change the number of channels from 1 to 16. Possibility to configure the speed of illumination and delay with which the next degrees will light up. Possibility to set the brightness (25-50-75-100%) Schemat of sensor connection Technical data: Number of channels (degrees): 16 Voltage: 12-24V DC Power: 240W Motion Detection: 2x PIR motion sensor Controller dimension: 150x85x22mm Color: White Motion sensor cable length: 100cm 1. Return of the product 2. 3. We will maintain good relations!