Stealth Press Kit Heat Set Insert Press Tool Soldering Iron Tip Thread Heat Insert Nut Embedded Kit 12pcs 936 Tips

Specifications Vertical Adjustment Range: 0-110mm Horizontal Adjustment Range: 95mm Clamping Diameter Range: 11mm-55mm Step-by-Step Usage Guide Assemble the Stand: Use the included screws to secure all components (stand arm, base, clamping mouth) until tight. Mount the Soldering Iron: Power off your soldering iron, then secure it in the aluminum alloy clamping mouth (adjust the clamp to fit the iron's diameter). Adjust Position: Use the stand's knobs to set the vertical height and horizontal angle of the iron, aligning the tip with your workpiece. Operate Safely: Power on the iron (if not pre-heated) and begin soldering; reposition the stand as needed for different work areas. Post-Use Care: Power off the iron, wait for it to cool completely, then remove it from the clamp and store the stand in a dry, cool area. Safety Precautions Do not touch the hot soldering iron tip or clamp (if the iron is active) to avoid burns. Ensure the clamping mouth firmly secures the iron before powering it on-prevent falls that could cause injury or damage. Place the stand on a flat, stable surface away from flammable materials (e.g., paper, plastic) to reduce fire risk. Color: Black Material: Metal + Aluminum Alloy Specification: 936 connector Package Contents: 1 * Soldering Iron Stand (not included Soldering Iron) 12 * 936 Tips Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.