This mini portable flocking machine is light. The handle's Inner Circuit has low power dissipation and high voltage output, makes this flocking machine has great flocking capacity. Lawn flocking machine for building models. Non- handle of adequate size for grip. Mini flocking machine, practical and portable with artistic shape. ABS plastic material. Flocking of You need 2 pc # 5 batteries which are not included. Grass flocking machine for plant models, landscape models, building models. Flocking of steps: Put in half a bottle of flocked grass. Place the high-voltage cable hanging at the mouth of the bottle so that it connects to the wire network and, therefore, in an energized state. Cover with glued water on the surface where you want to flock. Insert the ground wire in a location near the flocking surface. Press the operation button and wave up and down. The grass flock will fall vertically with the static. The grass flock will expand vertically and proportionally on the glue-coated surface. Specifications: Nominal operating voltage: DC + 3V Nominal operating current: 50 ma Nominal output voltage: equal DC3000V Nominal operating power: 0.15 W Two 1.5V batteries need to be installed (batteries are not included). Colour: Black Material: plastic Size: About 24.5cm Package Contents: 1 * Applicator 1 * brush 4 * powder(30g) Do not grip the grill when it is on. Do not hold the ground wire on the grid. Keep the appliance dry. Do not open the unit. For Adults, not for children under 14 years old.