16 Channel Stair Controller 12-24V 240W 2 PIR Detectors The controller allows smooth cascade lighting of stair lighting placed in the steps of the stairs or next to the steps, most often these are LED tapes - LED strips placed in the steps or LED lamps placed in the wall next to the steps or other type of stair lighting. The controller is equipped with 2 PIR detectors on the wires that we place at the bottom of the stairs and at the top of the stairs. When one of the detectors detects movement (entering or setting), lighting is done sequentially from the first light, the last or from the last to the first, depending on which detector detects movement. Inflammation of a single light is carried out gradually with the effect of brightening and dimming. Technical data: Model: RL-Step-01 Number of channels: 16 channels (degrees) Voltage: 12V-24V DC (direct current) Power: 240 Watt Motion detection: YES – 2 PIR detectors (sensors included) Dimensions: 150x85x22 mm Functions: Cascade (next) lighting and extinguishing of stair lighting Change the number of channels, the ability to set the right number of channels from 1 to 16 channels Possibility to set delay switching off lighting Possibility to set light brightness (can dim the lighting 25-50-75-100%)