Compatibility: Replacement strip compatible with Festool 495209 and 495207 splinter guards. Fits Festool FS/2, FS/2 KP, FSK guide rails, and Festool rail saws. Regular replacement helps maintain splinter-free cuts, especially when switching between saws or using the guide rail with multiple tools. Function: Replace the splinter guard as needed to ensure precise alignment of the guide rail with the cutting line and prevent material tearing during parallel and lateral cuts. The new splinter guard aligns accurately with the saw blade, enhances visibility of the cutting line, and reduces setup time. High Quality: Made from high-quality soft rubber with strong adhesive backing for high clarity and excellent adhesion. Stays securely attached to the guide rail without peeling off easily. Easy to Install: The splinter guard is pre-cut upon first use, matching the exact cutting edge for precise placement along the scribe mark. Simply remove the protective tape before application. Note: Clean the guide rail thoroughly with acetone and ensure the surface is free of grease and residue before applying the new strip. Installation Tips: - Work on a clean surface to avoid dust or debris adhering to the adhesive. - Peel off the adhesive liner carefully to prevent trapping debris. - Remove any leftover adhesive from previous strips using a scraper and acetone before installation. - When reapplying, position the strip slightly outward to allow for clean, accurate cuts. Color: As shown in photo Material: Plastic Package Contents: 1 x Splinter Guard Replacement Strip Note: - Allow 1–3 mm measurement tolerance and 1–3 g weight variation due to manual testing. - Product color may vary slightly due to lighting conditions and monitor display differences.