Solar Charge Controller 12V/24V PWM 10A 30A with Adjustable LCD Display Timer Setting

₩37,790
무료 배송

Solar Charge Controller 12V/24V PWM 10A 30A with Adjustable LCD Display Timer Setting

  • 브랜드: Unbranded

Solar Charge Controller 12V/24V PWM 10A 30A with Adjustable LCD Display Timer Setting

  • 브랜드: Unbranded
가격: ₩37,790
판매자::
₩37,790
무료 배송

현재 이용 불가

이 아이템이 언제 다시 입고될지 알 수 없습니다.

다음의 결제 방식을 사용하실 수 있습니다

설명

Origin:Mainland China Adjustable LCD Display : The adjustable LCD display allows you to easily monitor the solar panel's charging status and adjust the charging settings to suit your needs. PWM 10A 30A : With a maximum charging current of 30A, this solar charge controller can charge your solar panels quickly and efficiently. Timer Setting : The timer setting allows you to set the charging times for your solar panels, ensuring that they are charged during the most productive parts of the day. Solar Controllers : This solar charge controller is part of the 'Solar Controllers' category, making it a great choice for anyone looking to upgrade their home's energy efficiency. Product Description: 1. Industrial master control chip 2. Large LCD display, charge and discharge parameters can be adjusted 3. Complete 3-stage PWM charging management 4. Built-in overcurrent/short circuit protection, open circuit protection, reverse protection, they are self-recovery type, they do not damage the controller 5. Dual MOS anti-backflow circuit, it has ultra-low heat Product features: Rated voltage: 10A-30A Current: 10A Rated current: 40A-60A Current: 30A Maximum photovoltaic voltage: 12V battery, up to 23V; Up to 46V on a 24V battery Full cut-off voltage: 14.4V (default, adjustable) Discharge cutoff voltage: 10.7V (default, adjustable) Discharge recovery voltage: 12.6V(default, adjustable) Charge recovery voltage: 13.2V. Light switch threshold: PV panel 8V (light switch delay) Light control off lamp threshold: light control off lamp threshold USB output: 2 USB outputs, 5V/2.5A(Max) Standby current: Operating temperature: -35~ +60C Size/weight: 133.5* 70* 35mm 160g Instruction manual 1. This controller is 12V/24V automatic adaptation, when you first install, please make sure that the battery has enough voltage, so that the controller can recognize the correct battery type. Install the controller as close to the battery as possible to avoid voltage drop caused by too long wire, affecting the normal voltage judgment. 3. This controller is only applicable to all kinds of lead-acid batteries (including open, sealed, colloidal, etc.), do not use on other batteries (including lithium batteries, nickel-metal hydride batteries, etc.) 4. This controller can only use photovoltaic panels as the charging source, do not use DC or other power sources as the charging source. 6. The controller will heat up when running, please pay attention to install the controller on a flat and well-ventilated surface. Menu key: Used to switch the parameter interface, or hold down for 5 seconds to enter or exit the parameter setting. Up: On the parameter setting screen, tap once to make the parameter go forward. Add one more gear. Scroll down: On the parameter setting screen, tap once to move the parameter up one step. List: 1* solar controller
  • Fruugo ID: 283160016-630120758
  • EAN: 951670261775

배송 및 반품

-1일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 금 10 10월 2025–화 21 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기