Smart Control Motorcycle Alarm Remote Start System Keyless Mobile APP Control System Electric Motor Lock Motorcycle Alarm Siren -- Please use function description1. Turn on the anti-theft alarm by remote control Press the remote control lock button once, the turn signal flashes once and the horn beeps once to enter the anti-theft state. At this time, the vibration sensor is working and the motorcycle engine enters the stuck and stuck state and cannot start.2. Remotely Release Anti-Theft Alarm Press the "Unlock" button on the remote control once, the turn signal flashes twice and the horn beeps twice to release the anti-theft condition. The engine can be started normally.3. Anti-theft alarm silent status Press the "mute" button on the remote control once, the turn signal flashes once and the horn sounds once. After 3 seconds, press the "mute" button on the remote control once, the turn signal flashes once, the horn will not sound, and the anti-theft mute state will be entered. If a vibration alarm occurs, the turn signal indicator will flash and the horn will not sound.4. Start the motorcycle engine remotely Press the mute button on the remote controller twice, the motorcycle engine starts immediately and you can ride normally without using the key and the motorcycle. Remote control starts while driving, press the "mute" button on the remote control once to remotely turn off the engine.5. Remote Control Car Location Press the "Find Car" button on the remote control for 2.5 seconds, the turn signal flashes 5 times and beeps 5 times, sound and light find the car. APP and Remote Control Pairing: Open the Motorcycle APP, there will be a prompt, turn on the phone's Bluetooth switch, and a green dot on the Bluetooth icon on the interface indicates that Bluetooth is turned on. Click the gear icon in the upper right corner of the interface to enter the settings interface. Press the code learning key once, then press the remote control and two keys at the same time, then return the application from the setting interface to the main interface, press the button on the interface, and the host will beep once to indicate successful learning. (Note: When the mobile phone APP is paired with the remote control, the remote control and the main unit should be operated within 5M) The APP uses: All functions of the remote control can be realized by clicking the buttons on the mobile APP interface. There is no need to use the mobile phone network, and the control distance is effective at about 15 ~ 30M. (Due to the different Bluetooth versions of different brands of mobile phones, the control distance may be different). APP special functions: (1) shake to lock or unlock: open the mobile APP, click the gear icon at the top right of the interface to enter the setting interface. Slide and shake to lock and unlock the horizontal bar, select three intensity levels, select the appropriate intensity, the setting is completed and return to the main interface. By shaking the phone, the locking and unlocking functions are realized. (2) Multi-person sharing application: Due to security requirements, the host only saves one information about the mobile phone. But it can be used by multiple people in the family by sharing an authorization code. Open the mobile app, click the gear icon in the upper right corner of the interface to enter the settings interface. Click the authorization code, a string will appear, save the characters. On another mobile phone with the APP installed, you can control the same motorcycle by entering the setting interface and modifying the authorization code of the current mobile phone to the authorization code of the previous mobile phone.