Features: Vehicle loop detector is mainly used to detect the presence and passing vehicles Reset Switch: The reset switch allows you to manually reset the detector during startup and testing. This causes the detector to re-tune the sensor loop and become ready to detect vehicles Selectable pulse time: This function sets the length of time for which the pulse relay will be powered for 1 second or 0,5 seconds Pulse relay selection: The impulse relay can be configured to stimulate when a vehicle is detected or when the vehicle leaves the loop Increased sensitivity: This feature sets the undetected level to maximum sensitivity and is used to prevent the loss of detection of high-lying vehicles Switchable Sensitivity: 4 sensitivity settings are available on the switches to ensure configuration flexibility Toggle frequency selection: 4 frequency settings are available to prevent penetration between adjacent loops Filter Option: This option is used to provide a delay between vehicle detection and switching the output relay. This relay is usually used to prevent the false detection of small or fast moving objects Constant presence option: This feature ensures that vehicle detection is maintained when the vehicle is parked over the loop for extended periods of time. Specifications: Mobile and cloud printing services 220VAC Frame width (side): 2 mm 4,5VA Output relays 240 V / 5 A. Operating temperature -2065C Storage temperature -4085C Frequency range 20 kHz to 170 kHz Temperature compensation 50C/hr Response time 10 ms Signal Maintenance Time Unlimited / Limited Sensitivity Above: 0,02% high: 0,05% low: 0,1% lower: 0,5% Loop inductance Total loop plus connection cabling: 50 μH to 1000 μH. Ideal is from 100 μH to 300 μH Loop Wiring 200 meters long. Total resistance is less than 80hm, twisted at least 20 times per meter Relative humidity Please be aware: