Single-axis servo programmable stepper motor controller AC 220V 5V Description: Manual functions: freely programmable (you can perform a variety of complex operations: positioning control and control without positioning). Multiple work statuses, including automatic operation status, manual operation status, program editing status, parameter settings status. 8-bit digital tube display, manual/automatic status display, operating/stop status display, step/number/program value display, program editing, parameter display, input/output status display, CP pulse and direction display. Maximum output frequency: 40 KHz (especially suitable do split drive control). High resolution output frequency, which is as accurate as 1 Hz. Specification: Number of programs: 99; Input points: 6 (optical insulation); Output points: 3 (optical insulation); One continuous displacement range: -7999999~7999999; Lifting speed curve: 2 (optimized); Automatic start function: editable, control start and stop automatic start za using the panel buttons and the level applied do terminal; Manual operation function: the position can be adjusted; Parameter setting function: you can set the start frequency, lifting speed curve, clearance, manual length, manual speed, break stroke line number and zero return speed; Program Editing Function: You can insert and remove a program that can be modified. It has the function of assessing the jump line number, zeroing the data, the number of instructions is za long and very short; Zero return function: automatic return of do zero point in both directions; Programming instructions: 14; External operation function: By setting parameters and programming, you can perform an external interrupt operation by adding a switch on the operation terminal (limit A) A and the operation terminal (limit B) B; Power Supply: AC220V The package includes: 1 x stepper motor driver