Use a normal USB flash drive as the medium for transfer design 34pin floppy driver interface,5V DC power supply, easy to install 1000pcs partitions in a USB flash drive can be used Built-in self-format function. (read relevant documents to use this function) Jumpers with function for different machines (SFR1M44-U100K do not support jumpers) Panel: 8segment numbers: represent partitions number. Green led: status of read and write operation USB port: connect the USB flash drive Button: Left button is used to rise a ten-digit, and the right button is used to rise a single-digit, press 2 buttons together to rise hundred-digit Operation : Format USB flash drive: Use the built-in self-format function to format USB flash drives into 1000pcs partitions Install an emulator on the computer, and format every partition by operating driver A Use emulator UFA1M44-100, plug a USB flash drive into it, and connect to the computer, it will be recognized as a removable driver A or B under WINDOWS XP/2000/7, and format every partition. UFA1M44-100 is also built-in a self-format function. Read and write data: Install an emulator on the machine Install an emulator on the computer Connect the USB flash drive on the computer, read and write data directory by software, under WINDOWS XP/2000 Use emulator UFA1M44-100, plug a USB flash drive into it, connect to the computer, read and write data under WINDOWS XP/2000/7 Specifications: Housing Material: ABS Capacity: 1.44MB 2HD Format of disk: Cylinders: 80 Tracks: 160 Sectors/Track 18 Bytes/Sector: 512 Data Transfer rate: 500 kbps Encoding method: MFM Package included: 1 x USB Emulator 1Set x Screw 1 x Disc