Pwm Signal Is Converted Into Ppm Signal And Sbus Signal. Pwm Signal Analysis.Dual Ppm Signal Is Converted Into Pwm Signal And Sbus Signal. Two-Way Ppm Signal Analysis.Sbus Signal Is Converted Into Pwm Signal And Dual Ppm Signal. Sbus Signal Analysis.Voltage: 3.3-12V Support Reverse Polarity Protection After The Conversion Speed Signal Is Collected, The Decoding Is Interrupted Immediately Without The Pin Header Is 2.95mm Vertical Pitch Receiver Dedicated Pin HeaderCommunication Function, The Use Of Automatic Detection Will Lead To Signal Misjudgment, So In Order To Reliability, This Product Uses The Of Button Setting To Select The Input Signal.Skills Of AnalyzeSimultaneous Analysis Of 20 Pwm Signals.Simultaneous Analysis Of 2 Ppm Signals, 4 To 20 Proportional Channelsx2, Up To 40 Proportional Channels.1 Channel Sbus Signal Analysis, Including 16ch Proportional Channel, 2ch Switch Channel, Receiver StatusAccuracy: 250 Nanoseconds.Mode Setting Because Some Control Boards Have Two-Way Communication Function, The Use Of Automatic Detection Will Lead To Signal Misjudgment, So In Order To Reliability, This Product Uses The Of Button Setting To Select The Input Signal.There Are Three Indicators On The Front Of The Product, Representing Pwm Input Mode, Ppm Input Mode And Sbus Input Mode Respectively.Press And Hold The Setting Button And Power On The Conversion Board, The Three Indicator Lights Will Flash At The Same Time, Then Release The Button To Enter The Setting Mode.Press The Button Once, The Function Mode Will Switch Once, And The Corresponding Led Will . After Selecting The Required Input Signal, The Function Mode Can Be Saved After Power Off.Interface: W1-W20 Pwm1 To Pwm20, Pulse Width Input And Output, Bidirectional InterfacePp1-Pp2 Represents Ppm1 And Ppm2, Pulse WidthModulation Input And Output, Bidirectional InterfaceSb Stands For Sbus Interface, Digital Bus Input And Output, Bidirectional InterfaceUart Stands For Ttl Serial Port Output Baud Rate 115200, 8n1, One-Way Output InterfaceNOTE: Different batches may have differences in product appearance, color, and characters, which will not affect the usesize: 35.6 x 29mmMaterial: PCBcolour: greenPackage Contents: 1 x Signal ConverterOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.