Features: 1.Scope of Application: The print head supports for IP4820, for IP4850, for IP4950, for MG5220, for MG5250, for MG5320, for MG5350, for MG5250, for MG5340, for MG5240, for lX6520, for lX6550, for IX6540, for MX895, for MX715, for MX885 2.Vivid Color: The printhead replacement replaces the original printhead to print color pictures, photos and documents, which jets smoothly, prints sharply, and produces vivid colors 3.Shock Resistant: The print head has been tested many times to ensure glossy operation, which is made of ABS material, not easy to rust, durable, impact resistant 4.Easy Installation: This printhead set contains one printhead and a protective cover, no other accessories or extra tool help needed, just push the printhead to complete the installation 5.Stable Output: The output of the color print head is stable, which can provide stable printing process and long service life. Comes with a protective cover to prevent damage to the internal structure specification:Item Type: Print Head Product Material: ABS Applicable to: For IP4820, for IP4850, for IP4950, for MG5220, for MG5250, for MG5320, for MG5350, for MG5250, for MG5340, for MG5240, for lX6520, for lX6550, for IX6540, for MX895, for MX715, for MX885 PackageList:1 x Print Head 1 x Protection Cover Note1. Please make sure your printer can use the print head before placing an order. Before installing a new printhead, make sure the printer is working properly. Otherwise the motherboard may burn out, causing the printer to refuse to print 2. To prevent static electricity from affecting the stability of the chip, do not touch the chip 3. The print head must be used with a suitable ink cartridge, and dye ink and pigment ink cannot be mixed 4. Use the printer's automatic cleaning function to clean the print head 2 to 3 times to ensure your printer runs smoothly 5. If the printhead does not recognize your printer the first time, use an eraser or cotton swab to gently clean the chip, then reinstall the printhead and restart the printer Be careful when installing the nozzle, be sure to cut off the power before putting it away