Item Type: Reduction Geared Motor Bearing Type: Oil bearing Gear Material: Metal Motor Wire Material: Copper wire Spindle Material: Steel Radial Force: 1 kgf Axial Force: 0.7 kgf Maximum Bearing Capacity of Spindle: 5 kgf Rated Voltage: DC 24V ZGA37RG 205R-24V: Reduction Ratio: 1:24 No-load Speed: 205RPM Load Speed: 175RPM Load Torsion: 1Kgf.cm Gearbox Size: Approx: 37 x 24.5mm / 1.4in x 0.9in (D L) (manual measurement error 1mm) Output Shaft Size: Approx: 6 x 14mm / 0.2 in x 0.5in (D L) (manual measurement error 1mm) Motor Size: : Approx: 36.0 x 33.3mm / 1.4 inx 1.3in (D L) (manual measurement error 1mm) Mounting Hole Size: M3 Use: Automatic vending equipment, panning cameras, slot machines, currency detectors, coin return equipment, automatic doors, peritoneal machines, toy motors Package List 1 x Reduction Geared Motor 1. Use tolerance: pay attention to the use of voltage and current range, otherwise the performance and life of the motor will be reduced.2. Transport the motor: gently, try to use a part of the motor housing.3. Motor wiring: red leads to the positive pole, black leads to the negative pole, if the connection is reversed, the motor rotates in the reverse direction.4. Overload: as far as possible within the specified load range, it is forbidden to run the motor for too long in a stalled state or near a stall state. Otherwise, the motor will burn out.5. Motor storage:Storage temperature: 040;Storage humidity: 15%90%RH;Avoid placing in high temperature, high humidity and corrosive gas.6. Motor operating temperature: 070 1All metal gear, hightemperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body. 2With accuracy winding pure copper wire technology, the geared motor power instant increased by 30%. 3Use high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable. 4You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torsion. 5Can be used for vending equipment, panning cameras, slot machines, currency detectors, coin return equipment, automatic doors, peritoneal machines, toy motors.