Specification: Material: ABSandPC. Power:0.7W. Voltage:DC5V. Light color:white or warm white switch. Light quantities: 5 bright LED lamp beads. Sensor range:3 meter. Light delay time:20 seconds. Modes:light controlandmotion sensor. Power by:usb charging. Battery capacity:400mAh (battery included ). Size:60x57x70mm(lamp body) 67x83x14(base). Features: 1.Figure1:inductive head, do not press pr block,otherwise it will affect the human body induction. Figure2:the switch on the left is the human induction mode,the switch on the right side is the long light mode. Figure3:the switch on the left is warm, the switch on the right is white light. Figure4:charging port(applicatable to common phone charger). Figure5:magnetic base. 2.The human induction function is only activated in a dark enviroment, ambient light dose not start when light is brighter.In the dark enviroment, there is activity detected in the sensor range,the induction light comes on automatically,the person leaves or stops the activity after 20 seconds and the light automatically extinguishes. 3.The human body induction is a continuous trigger induction,once the human induction begins,as long as the induction range is not active,the induction light will always be bright,in the process,even the ambient light gets brighter,the induction light will also be automatically extinguished 20 seconds after the person has left. 4.Charfe 1.there are 3.7V400MA hithium batteries in this product,and it can be used for recycling. 2.the charge is red when charged,the charge is full of blue. 5.White light and warm light double color can press A key to switch. 6.Magnet adsorption, can place in anywhere,360 degrees arbitrary rotation. Package included: 1x LED night light