<strong>Features:</strong> 1、PART NUMBER: The replacement part number of the battery gauge is 803RB2448BCJ301O, can directly replace the old or damaged battery gauge. 2、MAIN FUNCTION: 24V round battery gauge can filter the instantaneous voltage fluctuation, accurately indicate the storage capacity of forklift battery. 3、LED DISPLAY: LED is used to display battery power to ensure real time tracking and visual display, which can be used in dark environments. 4、ABS HOUSING: The round battery gauge adopts ABS shell, resistant and abrasion resistant, ensuring stable use in bad weather. 5、ALARM SIGNAL: Flashing red LED signals energy reserve alarm at 70% discharged, double flashing red LEDs signal empty alarm at 80% discharged. <strong>Specification:</strong> Item Type: Round Battery Gauge Working Voltage: 24V Product OE: 803RB2448BCJ301O Power Display: 1-1/2-1 Material: ABS Round Dial Diameter: Approx. 57mm / 2.24in Application: Replace the worn and damaged battery, display whether the battery is fully charged and discharged to a certain standard, check the capacity of the battery and display the remaining capacity of the battery, so as to judge the time available for the vehicle to work. Battery Gauge Features Multicolor 10 bar LED displays state of charge (5 green, 3 yellow, 2 red LEDs). Flashing red LED signals energy reserve alarm at 70% discharged. Double flashing red LEDs signal empty alarm at 80% discharged. Normally closed relay opens at 80% discharge for lift lockout. This unique holding relay will only lock out at the end of a lift cycle. Recognizes improperly charged battery. Key switch activated LED display (Fuel gauge electronics are energized as long as they remain connected to the battery). Wide range adjustable discharge. Dual reset methods in each gage: Open Circuit Reset for vehicles that exchange batteries and Charge Tracking Reset for vehicles whose batteries remain connect