PX4 Differential Airspeed Pitot Tube Airspeedometer Airspeed Sensor compatible with PX4 Flight Controller

: The modified version of airspeed head adopts digital differential pressure sensor, I2C communication, suitable compatible with , adoting PX4 firmware Different from analog differential voltage sensor adopts, is not universal Airspeed sensors are highly recommended compatible with fixed-wing and VTOL frames. They are so important because the autopilot does not have other means to detect stall. compatible with fixed-wing flight it is the airspeed that guarantees lift not ground speed! The compatible with digital differential airspeed sensor has a very low offset, a high resolution and, best of all, does not suffer from the noise induced by long cables and offsets in the ratio-metric output on the 2.6 analog airspeed sensor. Featuring a Measurement Specialties 4525DO sensor, with 1 psi measurement range (roughly up to 100 m/s or 360 km/h or 223 mp/h), the compatible with Airspeed Sensor Kit enables a resolution of 0.84 Pa, with data delivered at 14 bits from a 24 bit - ADC. It also measures temperature to allow calculation of true airspeed from indicated airspeed using the MS5611 static pressure sensor on compatible with . Not influenced by the heat of nearby processing components, it is much closer to the air temperature than with previous analog sensor setups. Supported on compatible with and PX4 autopilot generation boards. Color: As Shown Material: plastic Package Contents: 1 x Airspeed module 1 x Connecting cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.