Multimeter - analogue meter U/I/R/C/bat with manual change of measuring ranges Pro'sKit MT-2017N Catalog No.: 19075 of the item The offered meter is a universal measuring tool combining the functions of: direct voltage measurement in the range 100m/2.5/10/50V (3%), 250/1000V (4.0%) NULL DCV DC voltage measurement in the range 5/25V (5%) alternating voltage measurement in the range 10/50/250V (4%), 1000V (5.0%) direct current measurement in the range 50A/2.5m/25m/250mA (3%), 10A (4%) resistance (resistance) measurement in the ranges 2k/20k/200k/2M/20M (4%) capacity measurement in the range of 2mF (indicative indication) measurement of loss/amplification in dB (0dB1mW for 600) circuit continuity test (with closed circuit buzzer <200) transistor gain measurement (0-1000) battery test 1.5/9V (BAD indications, ? and GOOD) LED light test An interesting, rare feature is the measurement of NULL DCV voltage. The function is applicable when we do not know the polarity of the measured voltage. 0V is then in the middle of the scale and the hand leans to the left for negative voltages or to the right for positive voltages. The measuring ranges of the meter are changed by a rotary knob, a smaller knob is used to reset the meter when measuring resistance. A large, analog indicator thanks to continuous indications (rather than sampled as in digital meters) allows you to observe momentary jumps in measured values, easily read shows changes in signal flow directions and provides easier reception of indications. The meter is equipped with high-quality measuring cables with a length of about 90cm, the housing is finished with non-slip plastic and has a folding support that allows you to position the meter at an angle. Technical data Supply Voltage: 9V 6F22 3V 2xAA (Battery Included) Measuring cables: 10A/1000V, length approx. 0.9m Meter dimensions (length/width/height): 170/108/40mm Weight (without battery): approx. 320g The set includes a meter, measuring wires, a set of batteries and an instruction manual.