Programmable Touch Floor Thermostat

Approximately 8.7 × 8.7 × 5.5 cm in size and weighing 295 g, this thermostat uses white flame-retardant PC casing and is rated IP20 for indoor use. It operates in environments from -5°C to 50°C and draws only 2 VA. With a maximum switching capacity of 16 A, it handles typical UK underfloor heating loads. Users can set temperatures from 5°C to 95°C, though the safety limit caps output at 60°C (factory set to 35°C). Temperature reading accuracy is adjustable between ±0.5°C and ±10°C, defaulting to ±1°C. Two control logic options are available: simple temperature regulation or advanced dual-mode (temp + weekly program + upper limit). Installation is via flush-mounting into standard wall boxes. The interface combines a white-backlit LCD and touch-sensitive surface — enabling direct input without tactile fatigue or mispresses. Each day allows six programmable time–temperature pairs, fully customisable across the week. It works natively with electric heating cables/mats and also triggers 230 V AC on/off actuators in water-fed underfloor circuits — no gateway or hub needed. Designed for straightforward setup and long-term reliability, it supports common UK heating infrastructures including combi-boiler-linked wet systems and dedicated electric underfloor zones in kitchens, bathrooms and living areas.