1Instrument base plate is provided with magnet, instrument can adsorbed on the metal shell when testing, the operation more convenient. 2The dynamic sound and light indicates the positive or negative phase of the phase sequence of the three-phase power supply, which is clear at a glance. 3More sensitive ETCR1000C clamp, can even sense the AC voltage signal as low as a few Volts, with a wider range of live electricity. 4It has a better power-saving performance with the maximum rated power of 300mVA. 5The three clamps of ETCR1000C are in three colors, it is more in line with the distinction of three-phase line, and more scientific and artistic overall appearance. 6In addition to phase sequence detection, it also has the functions of live wire examination, simple power detection, fire-wire identification, phase deficiency determination, break location detection, DC line break and line maintenance, equivalent to 3 induction electric pens. 7Field test, effectively protect the physical safety of operators and improve productivity. 8Comes with a lanyard, compact size and lightweight, easy to carry.Condition: 100% Brand New Item Type: Non-Contact Phase Sequence Detector Material: ABS Color: As shown in the picture Product Non-contact phase detector Functions Phase detection (normal phase, reverse phase and phase deficiency), live wire examination, simple power detection, breakpoint location and line maintenance Power Supply DC 3V 2 x AA batteries (LR6)(Not included), continuously working for 70 hours Voltage Range AC 701000V, 4565Hz (Sine Wave Continuous Input) Clamp Wire Size Diameter: 10-40mm / 0.4-1.6in LED Display Positive Phase Sequence: The four phase-sequence lamps blink in order (clockwise). Negative Phase Sequence: The four phase-sequence lamps blink in order (counterclockwise). Line-voltage Indication: L1, L2, L3 lamp light up. Default Phase: L1/ L2/L3 lamp is off. Open Circuit: L1/L2/L3 lamp is off. Buzzer Positive Phase Sequence: The instrument emits intermittent short beeps Negative Phase Sequence: The instrument emits a continuous long beep Battery Check After the power is turned on, the POWER indicator is on: The battery is low. The LOW BATTERY light is on. Auto Power off After 5minutes, the meter automatically cut off power supply. Meter Dimension 70x74x30mm/2.8x2.9x1.2in Clamp Lead Length 0.6m/2ft Net Weight 256g/9oz Working Temperature and Humidity -1055; below 80%rh Storage Temperature and Humidity -2060; below 90%rh Maximum Measured Voltage AC 1000V Dielectric Strength 5.4kVrms