Portable Battery DIY Mini Spot Welder Machine with LCD Screen Lithium Battery Power Supply

₩60,990
무료 배송

Portable Battery DIY Mini Spot Welder Machine with LCD Screen Lithium Battery Power Supply

  • 브랜드: Unbranded

Portable Battery DIY Mini Spot Welder Machine with LCD Screen Lithium Battery Power Supply

  • 브랜드: Unbranded
희망소매가격: ₩79,290
가격: ₩60,990
절약 금액: ₩18,300 (23%)
판매자::
₩60,990
무료 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Feature:1. Wide selection of welding power supply, lithium battery power supply or 12V car battery.(Battery Not Included)2. The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.3. The controller is mainly for welding nickelplated steel strips from 0.1mm to 0.15mm. With LCD display screen, can display welding parameters.4. The welding pen and the input line are connected by Ushaped coldpressed terminals, which is convenient for disassembly and replacement.5. Using automatic touch welding mode, while retaining the manual trigger interface, you can choose according to your own use.6. The power board uses 2 Gusi copper to increase the overcurrent capacity. Using 5 300A MOS tubes, nondisassembled MOS tubes.7. The MOS tube driver adopts the imported special chip driver. The fastest MOS tube can be hit with 20nS. The switch is fast to prevent the explosion of the tube and the nontriode pushpull drive.8. The MOS drive design adds a transient diode to protect the MOS and prevent the explosion of the tube.9. 10AWG multifilament flexible wire is used for the welding pen line and the input line to increase the overcurrent capacity.10. A 25V 10000uF highfrequency lowresistance capacitor is added to the power input for energy compensation, which increases welding stability.Specification:Item Type: Spot Welding MachineMaterial: ABS+MetalColor: Red+Blue+BlackInput Line Length: Approx.20cm/7.87inLength of Welding Pen: Approx.30cm/11.81inBattery: Lithium battery(not included)Quantity: 1 SetWeight: Approx. 207g / 7.3ozHow to Use1: Power connectionThe controller comes with a 20cm long 10AWG input wire. One end has been crimped with a U-shaped terminal, and the other end has not been processed. Connect the crimped U-shaped terminal to the control power input terminal, and the other end is processed according to its own power supply. Do not connect the negative electrode wrong.2: Switch on and offThere is a power switch under the control board. After pressing, wait for 3 seconds. After the buzzer drops, the LCD lights up and the boot is complete. Press the power switch again to shut down.3: Screen description and parameter adjustment.4: WeldingKeep the welding pin clean. If the welding pin is polished into a round head, the welding effect can be improved. There are manual and automatic methods.Battery Selection:1: 12V car battery from 25 to 40ah, requires good performance and low internal resistance2: 4000 to 6000mAh 45C to 60C 3S model aircraft lithium battery3: 30 to 35ah 12V capacity lithium battery packWelding Materials:Welding 0.1~0.12mm thick nickel-plated steel stripEnergy setting:Energy must gradually increase from 01, and the maximum cannot exceed 50.Exceeding the above conditions may damage the controller..Package List:1 x Controller(Battery Not Included)1 Pair of Welding Pen 1 Pair of Power Input Line(Red and Blue)1 x Power Access PlugNote:1. Please allow 1‑2in error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.3. Spot Welding Machine Set only, other accessories demo in the picture is not included.
  • Fruugo ID: 416495373-878843943
  • EAN: 7540131436536

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Warning: Please read the product instructions carefully before use to ensure correct use.
일련번호: 7540131436536

배송 및 반품

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 월 20 10월 2025–월 27 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795