Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

₩101,090
+ ₩8,049 배송

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • 브랜드: Unbranded

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • 브랜드: Unbranded
가격: ₩101,090
판매자::
₩101,090
+ ₩8,049 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Oxygen Inhaler Wall Entry Buoy Type Oxygen Filter Flow Meter Meter Oxygen Supply Parts Item Type: Oxygen Inhaler Flow Range: 1~10L/min, 1~15L/min Input and Output: 0. 4MPa~0.5MPa Exhaust Pressure of Safety Valve: 0.17MPa±0.05MPa How e:1. When using the inhaler, fill the inhaler bottle with distilled water first. It is forbidden to replace it with physiological saline. The water level in the inhaler bottle is between the upper and lower water levels. Tighten the inhaler bottle. 2. Before inserting the inhaler into the oxygen supply terminal socket, turn off the flow adjustment switch, and then insert the quick plug into the oxygen supply terminal socket hole. When you hear a "click" sound and see the oxygen supply terminal socket locking sleeve automatically slides , It means that the quick plug and the oxygen supply terminal socket have been connected and locked 3. Before supplying oxygen, insert the oxygen inhalation tube (purchased separately) into the oxygen supply connector, and then turn the flow adjustment switch counterclockwise to turn on the air source to make the float rise slowly (the scale line aligned with the center of the float is the flow reading, unit Is liters/min), the oxygen supply can be adjusted as needed 4. During the oxygen supply process of the inhaler, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be closed in time, the humidification bottle should be unscrewed, and distilled water should be added according to the requirements of Article 1 of this item. Screw on the body of the inhaler and continue oxygen supply. 5. When the inhaler is out of use, the air source of the inhaler should be turned off; if it needs to be removed, hold the inhaler with one hand and unlock it with the other hand and then remove it (the unlocking method of the different oxygen supply terminal sockets is explained by the engineering installation unit ). Then pour out the water in the bottle for cleaning and disinfection, and store it in a non-corrosive gas and well-ventilated room.
  • 브랜드: Unbranded
  • 카테고리: 센서
  • Fruugo ID: 413728961-874299789
  • EAN: 4081337801405

배송 및 반품

24시간 이내에 발송됨

  • STANDARD: ₩8,049 - 배달 사이 금 17 10월 2025–화 28 10월 2025

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • BantianjiedaoxiangjiaotangshequzhonghaogongyechengC2dongwuceng505
  • Longgangqu
  • Shenzhenshi
  • Guangdongsheng
  • China
  • 518000
  • Wallace22578@outlook.com
  • +8613084447403

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM.1.PLANTA 1,DERECHA.OFICINA3.Fuenlabrada.
  • Madrid
  • Spain
  • 28947
  • successservice2@hotmail.com
  • +34910602659