This professional dental adhesive kit is designed for the secure and efficient bonding of orthodontic brackets. The no-mix paste formulation ensures a simple application process with a fast cure time of under 5 minutes, allowing orthodontic procedures to proceed quickly. The kit provides a complete solution for bracket bonding, including adhesive, primer, and etchant. Key Features: * **Complete Bonding Kit:** Includes everything needed for the procedure: adhesive paste, liquid primer, acid etchant, and application tools. * **Fast & Efficient:** Features a rapid curing time of less than 5 minutes after bracket placement. * **No Mixing Required:** Ready-to-use paste adhesive saves time and ensures consistent application. * **Strong Bond:** Offers a reliable shear bond strength of 17.2 MPa for secure bracket attachment. * **Comprehensive Kit Contents:** Contains 3 tubes of adhesive paste (3.5g each), 1 bottle of acid etchant (2.5ml), 1 bottle of liquid primer (10ml), 20 brush heads, 1 needle, and 3 stir pens. Usage Instructions: 1. **Tooth Preparation:** Clean the enamel surface thoroughly, rinse with water, isolate the tooth, and dry with an oil- and moisture-free air stream. 2. **Acid Etching:** Apply the acid etchant to the tooth surface for 50-60 seconds. Rinse thoroughly with water and dry. The surface should appear chalky white. 3. **Primer Application:** Use a brush to apply a thin layer of the liquid primer to both the etched tooth surface and the bracket bonding surface. Keep the surface moist. 4. **Bracket Bonding:** Apply a small amount of the adhesive paste to the primed bracket. Position and bond the bracket to the tooth within 20 seconds, applying light pressure for 5-10 seconds to secure it. Remove any excess material after 40-60 seconds. The bond will be fully cured and ready for further orthodontic procedures after 5 minutes. Storage: Store the adhesive kit below 23°C. Do not freeze.