OBD2 Scanner OBDII Diagnostic Fault Code Reader Scanning Adaptor Cable Support for ELM327

₩89,090
무료 배송

OBD2 Scanner OBDII Diagnostic Fault Code Reader Scanning Adaptor Cable Support for ELM327

  • 브랜드: Unbranded

OBD2 Scanner OBDII Diagnostic Fault Code Reader Scanning Adaptor Cable Support for ELM327

  • 브랜드: Unbranded
희망소매가격: ₩115,790
가격: ₩89,090
절약 금액: ₩26,700 (23%)
판매자::
₩89,090
무료 배송

재고 있음

다음의 결제 방식을 사용하실 수 있습니다

설명

Feature:1. Full Adapters Set: The main device can be directly connected to the Elrasoft.com UUSP (UPA USB Serial Programmer) or by an optional DB9 male female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.2. Easy Operation: Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually. Additional packages can be covered by commonly available adapters plugged into the 40 pin ZIF socket.3. ISP Connector: The main device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually.4. EEPROM: Simply connect the mainboard to the UPA programmer directly or by using a DB9 male female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket.5. For Motorola MCU: Pick the adapter you want to use, attach the flat cable to the adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on: target supplied from upa, off: target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB.Specification:Item Type: ECU ProgrammerLanguage: English.Software Vesion: V1.3UPA USB Programmer Description:New Upa usb is the full set with all adapters, The main Device can be directly connected to the Elrasoft.com UUSP (Upa usb Serial Programmer) or by an optional DB9 male female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually.Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket.The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector)Upa usb Device Programmer V1.3 Update Info:Added MC9S12HY64/HA32 supportAdded Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064AAdded 24C1024, 24C1025 supportAdded Bulk erase data memory to PICs 16F913 7/946, 12F629/675Added script function GetPageAdded script function AutoBaudRateDevice (hc08 devices only)Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControlAdded script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean;Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICsFixed bug with SetHC08SecurityBytes (SecBytes: string) functionFixed bug with 68hc11 reading if Oscillator is not set to AutoUpdated script example filesThe software is digitally signedUSB driver upausb.sys is digitally signedEEpromsSimply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.For Motorola MCU'sPick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier)Once your workshop is equipped with our Adapter Set you will have a all new UPA Experience.STMicroelectronics ST62:ST6240, ST6245, ST6249NSC CR16: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9For Motorola HC05: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28
  • Fruugo ID: 335619428-738927419
  • EAN: 7904268151456

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Warning: Please read the product instructions carefully before use to ensure correct use.
일련번호: 7904268151456

배송 및 반품

2일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 월 20 10월 2025–월 27 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • Shenzhen Shi Douban Lv Keji Youxian Gongsi
  • Shenzhen Shi Douban Lv Keji Youxian Gongsi
  • Road Xinlian Gaoke One, No. 8, Xinsuda Warehouse, Building A, Door 1
  • Humen
  • Dongguan
  • CN
  • 518000
  • hjjnhyj47@outlook.com
  • 18617143716
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795
  • https://www.ozon.ru/seller/chosenmelody-600361/products/?miniapp=seller_600361