4 in 1 Parallel Power Hub Intelligent Battery Controller Charger for DJI Phantom 3 Standard SE FPV Drone, Plug Type:UK Plug 1. Material: Aluminum shell circuit board 2. The DJI Phantom 3 charger can simultaneously charge 3 Phantom 3 batteries (compatible with all versions of Phantom 3) and the remote control (not compatible with Phantom 3 standard version and SE remote control). The power of this charger is 237W. Each of the 3 circuits is 17.5V4.5A, which can quickly charge 3 batteries. The charger has protections such as short circuit, overheating, overcurrent, overvoltage, intelligent monitoring, etc., which is safe and stable. The shell is non-conductive after anodizing treatment, and it is safer to connect to the ground wire double insurance. 3. Input: 110-240V 4. Output: 17.5V 13.5A (4.5A per channel) 5. Dimensions: 15.9 x 10.9 x 3.6 cm 6. Net weight: 780 grams 7. Total weight: 800 grams (including packaging) 8. Power specifications: there are national regulations, American regulations, European regulations, British regulations and Australian regulations 9. Applicable to: Phantom 3 full range of batteries, namely: Phantom 3 Standard, Phantom 3 Professional, Phantom 3 Advanced, Phantom 3 4k, and Phantom 3 SE. But the remote control port is not suitable for charging Phantom 3 Standard and Phantom 3 SE, other versions of the remote control port are suitable Note: The batteries,remote controller and mobile phone not included