The MT6835 chip is fourth-generation magnetic Angle encoder IC, an upgraded version of the MT6825, based on Anisotropic Magnetoresistive. The (abbreviated as ) technology and proprietary signal processing technology have achieved absolute Angle measurement from 0° to 360°. This chip consists of a pair of Wheatstone Bridges and a signal processing ASIC circuit. As the magnetic field parallel to the chip rotates, the chip can output Angle signals such as ABZ/UVW and PWM. Users can also read the 21-bit absolute Angle data inside the chip through the SPI interface that supports a clock as high as 16MHz. Supports a maximum rotational speed of 120,000 revolutions per minute. The MT6835 chip can be applied to various scenarios with high-speed and high- control requirements, such as closed-loop stepper motor control, 2500-line servo, and 17-bit absolute value servo motor control, etc. Based on technology, it provides absolute Angle measurement from 0° to 360° Operating voltage: 3.3-5.0V Operating temperature: -40℃ to 125℃ Typical values of linearity deviation Less than ±0.5° (factory value), typical values of linearity deviation Less than ±0.07° (typical value self-calibration), typical values of linearity deviation Less than ±0.02° (typical self-calibration) The system delay is 2us to 10us, and it can support a maximum rotational speed of up to 120,000 revolutions per minute It provides a standard 4-wire SPI interface (with a maximum clock of 16MHz) to read 21-bit Angle data inside the chip The incremental output ABZ supports any resolution from 1 to 10000 lines The incremental output UVW supports any pair from 1 to 16 It provides a 12-bit PWM output Specifications: C: SPI+AB:10000 Color: Black Material: PCB Package Contents: 1 * Magnetic Encoder 1 * Magnet Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of th