Feature: 1. The AB filler soil (modeling special fill) is a new product developed for toy models and molds. 2. It is clay‑like (similar to putty) before curing. It is easy to operate and can be shaped freely during operation time. 3. It is water-resistant and easy to be sanded after curing, and its bonding strength and structural strength are high. Easy to shape and strong adhesion. 4. The curing shrinkage rate is very small, suitable for the production of difficult models, samples and parts. 5. High-quality clay, moderately water-soluble, environmentally friendly and easy to operate, which makes the joint part of the model too natural. Specification: Item Type: Fill Soil Condition: 100% Brand New Material: Clay Weight: Approx. 100g Instructions: 1. Remove surface stains and clean with sandpaper 2. A and B are used in equal proportions of 1:1. If you stick your hands, you can wet your fingers. 3. Repair the model with wet fingers 4. Convenient cutting and plasticizing stage, after curing, cutting, cutting, drilling, polishing, etc.. Package List: 1 Pack x Model AB Fill Soil Note: 1. If there is adhesion, apply the powder on your hands or moisten your fingers.2. When the ambient temperature is lower than 10 ° C, the curing is slow, and when it is lower than 5 ° C, the curing is stopped.3. After mixing the putty, the temperature is increased to accelerate the curing.