MK10 Hotend Kit for 3D Printer | M7 Nozzle and Throat with PTFE Tube and Aluminum Heater Block | Improved Version Fit with M3 and M4 Thermistor JN

₩14,590
무료 배송

MK10 Hotend Kit for 3D Printer | M7 Nozzle and Throat with PTFE Tube and Aluminum Heater Block | Improved Version Fit with M3 and M4 Thermistor JN

  • 브랜드: Unbranded

MK10 Hotend Kit for 3D Printer | M7 Nozzle and Throat with PTFE Tube and Aluminum Heater Block | Improved Version Fit with M3 and M4 Thermistor JN

  • 브랜드: Unbranded
가격: ₩14,590
판매자::
₩14,590
무료 배송

현재 이용 불가

이 아이템이 언제 다시 입고될지 알 수 없습니다.

다음의 결제 방식을 사용하실 수 있습니다

설명

Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, for Creator Pro, for Creator X, for Dreamer, Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Duplicator 4S, Duplicator 4X, i3, etc. Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to filaments temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle; Improved Version: an M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and thermistor; Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece. Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy. Specification of nozzle: Compatibility:MK10 hotend M7 thread aluminum heater block; Output diameter:0.4mm; Input diameter:1.75mm; Size:M7; Material:Brass. Specification of throat: Compatibility:MK10 hotend M7 thread aluminum heater block, MK10 aluminum cooling block; Filament diameter:1.75mm; Size:lower thread M7, upper diameter 7.8mm; Length:26mm; Material:Stainless steel with 2mmX4mm PTFE tube. Specification of aluminum heater block: Compatibility:MK10 M7 nozzle, MK10 M7 throat, 6mm heater, M3 or thermocouples; Shape size:20mm*20mm*13mm; Material:Aluminium alloy. color:silver Package Contents: 1 piece Brass nozzle 1 piece Stainless steel throat 1 piece 34mm PTFE tube 1 piece Aluminum heater block Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • 브랜드: Unbranded
  • 카테고리: 복사
  • Fruugo ID: 350642939-764638112
  • EAN: 6163104820883

제품 안전 정보

아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제품 안전 라벨

CE Mark
안전 경고: Please refer to the product manual before use

배송 및 반품

-1일 이내에 발송됨

  • STANDARD: 무료 - 배달 사이 월 13 10월 2025–목 23 10월 2025 - 무료

중국에서 발송.

당사는 귀하께서 주문하신 제품이 주문 명세에 따라 빠짐없이 배송되도록 온 힘을 기울이고 있습니다. 다만, 주문하신 것과 다른 상품이 배송되거나 빠진 상품이 있는 경우, 또는 주문 내용에 만족할 수 없는 다른 이유가 있는 경우에는 주문 전체나 주문에 포함된 일부 제품을 반품하시고 해당 상품에 대해 전액 환불받으실 수 있습니다. 전체 반품 정책 보기

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

제조사:
다음 정보는 Fruugo에서 판매되는 관련 상품의 제조사 연락처입니다.

  • Ebeis(HK) co., Limited
  • Ebeis(HK) co., Limited
  • Flat/RM 185G/Fhang Wai lnd Centre
  • No.6 Kin Tai ST, Tuen Mun, NT
  • Hongkong
  • HK
  • 999077
  • ebeishk@hotmail.com

EU 내 책임자:
다음 정보는 EU 내 책임자 연락처입니다. 책임자는 유럽 연합에서 판매되는 관련 상품에 대한 준수 의무에 책임을 지는 EU에 기반을 둔 지정 경제 주체를 말합니다.

  • Yuan Li
  • Sea&Mew Consulting GmbH
  • Mittenhuber Stra?e 4
  • Neumarkt
  • DE
  • 92318
  • Compliance.EU@outlook.com
  • 4915224685061