Item Type: Camera Module <br>Material: PCB <br>Sensor: 1.3 Million Pixels 1/3' for SONY IMX225 CMOS Sensor <br>Processor: for NEXTCHIP NVP2431H <br>Minimum Illumination: 0.01 LX at F1. 2 <br>Effective Pixels: 1280(H) x 960(V) <br>Frame Rate: 25fps 30fps <br>Video Amplitude: 1.0VPP <br>Exposure Mode: Progressive Exposure <br>Day and Night Mode: Full Color Without Ircut <br>White Balance: Auto White Balance <br>Video Signal: AHD <br>Noise Reduction: 3D Noise Reduction <br>Working Temperature: -20 to 70℃ <br>Power On and Power Off Test: 500 Times Interval, No Crash and No Abnormal Picture in 2s1、PREVENT INTERFERENCE: The camera module is rearranged, the layout is optimized, and the interference of signal wiring is reduced. <br>2、FILTER CAPACITOR: Increase the filter capacitor of the sensor power supply to make the noise more delicate and the low light effect better. <br>3、ADD REVERSE CONNECTION: Add reverse connection to the power input end of the camera module to protect the diode. <br>4、INCREASE ESD ON THE POWER SUPPLY SIDE: Increase ESD on the power supply side of the vehicle camera module to protect the device. <br>5、ADD ESD TO THE VIDEO END: Add ESD to the video output end of the car camera module to protect the device.1 x Camera&nbsp;Module