Portable RS-24C condensate drain pump for air conditioners, fully automatic and designed for 1-3P wall-mounted units with 100-230 V power supply. Key benefits and why you need this pump: - Removes condensate automatically to prevent water overflow and indoor leaks, reducing maintenance effort. - Compact and quiet operation allows installation inside living spaces or above ceilings without nuisance noise. - Wide voltage compatibility makes the unit suitable for installations in different regions without additional transformers. What makes the RS-24C stand out: - Precise control using an imported chip, providing reliable automatic on and off cycling as the tank fills. - Very low noise level of 19 dB and no noticeable vibration, so the pump operates discreetly near occupied rooms. - Compact size and a simple installation kit included, enabling fast setup with common tools. Key specifications and performance: - Model: RS-24C. - Voltage: 100-230 V, 50-60 Hz, suitable for global voltage ranges. - Maximum lift: approximately 10 m (32.8 ft). - Maximum flow rate: 24 liters per hour. - Water tank capacity: 70 ml. - Applicable air conditioner capacity: up to 10 kW. - Operating mode: not continuous duty, intended for intermittent condensate removal. - Noise level: 19 dB. Compatibility and suitability: - Designed for 1-3P wall-mounted air conditioning units and systems up to 10 kW in cooling capacity. - Suitable for installations where gravity drainage is impractical due to height or distance from a drain. Package contents: - 1 pump unit. - 1 hose. - 2 cable ties. - 2 screws. - 2 expansion plugs. - 3 additional accessories for installation. Installation and use notes: - The pump is not rated for continuous operation and is intended to cycle on when the 70 ml reservoir reaches the trigger level. - Ensure the discharge line run and vertical lift do not exceed the maximum lift of 10 m for reliable performance. - Use the included hardware and hose to secure and route condensate to an appropriate drain. Practical use scenarios: - Mounted behind a wall-mounted split indoor unit installed high on a wall where gravity drainage to a floor drain is not possible. - Installed in a ceiling void above a living area to pump condensate up and out to a nearby roof or waste pipe when the indoor unit is below the available drain height. - Used in a utility room or mechanical closet where quiet operation is required and the drain point is several meters above the pump location. This RS-24C condensate drain pump delivers automatic, quiet condensate removal for wall-mounted air conditioners with clear installation components and reliable control for intermittent use.