Micro Hydro Generator DC12V Water Flow Powered Inline Design for Stable Onsite Power Generation

Micro Hydroelectric Flow Generator 1pc Model: water flow generator Installation: selfcontained Versions: DC5V and DC12V, twowire regulated output Product overview This compact micro hydro generator converts water flow into a regulated DC output for lowvoltage electronics and sensors. It is a selfcontained unit designed for inline plumbing installation and is compatible with common flow sensors, water level controllers, float switches, flow meters, and small pumps. Key benefits Onsite power from flowing water: Generates usable DC voltage when liquid moves through the unit, reducing the need for external wiring or batteries for sensors and lowpower devices. Simple installation: Selfcontained design and twowire connection simplify integration into existing water lines or sensor loops. Regulated output: Twowire regulated output provides a stable DC5V nominal output under suitable flow conditions; higher flow can produce higher output as specified. Wide operating range: Works across practical household and light industrial flow and temperature ranges for diverse applications. Technical specifications Working pressure 1.2 MPa Working pressure range 0 to 1.0 MPa Test pressure 0.6 MPa Temperature range 0 to 80 C Allowable maximum ambient temperature 100 C, maximum duration 30 minutes Storage temperature 25 to 65 C Flow range 3.5 to 20 L/min (pressure 0.05 to 0.2 MPa) Maximum output: 6 VDC at water flow 15 L/min Output voltage: 5 VDC at water flow 4 L/min Output voltage at starting flow: approximately 3 VDC +/ 0.25 V at water flow 3.5 L/min Function and compatibility Twowire regulated generator provides DC output tied to water flow rate. Nominal DC5V version is intended for devices requiring a 5 V supply while a DC12V option is available for applications needing higher nominal voltage. Compatible with plumbing systems that support the listed flow and pressure ranges. Works with flow sensors, water level controllers, float switches, flow meters, and small pumps as an inline power source or flowbased energy source. Model name: water flow generator. Installation is selfcontained for straightforward integration. Practical use scenarios 1) Remote sensor power: Provide local power to flow sensors, water level controllers, or microcontrollerbased monitoring devices in locations where running separate power lines is difficult. 2) Pool and tank systems: Use as a power source for float switches or pool and tank monitoring electronics that operate when water circulation is active. 3) Smallscale microhydro projects and experiments: Demonstrate flowtoelectric conversion and power small LEDs, sensors, or lowpower control circuits during development or testing. Notes and considerations Output voltage depends on water flow rate. Refer to the flow versus output values listed in the technical specifications to match the unit to your device power requirements. Verify system pressure, temperature, and flow conditions before installation to ensure compatibility with the stated ranges. This product is sold as a single unit, model water flow generator, with options for DC5V and DC12V regulated output.