16 MPa Pressure Test Pump A manual pressure test pump engineered for rigorous testing. It delivers precise pressure with a robust 38 ml per cycle flow rate, making it suitable for reliable pipe testing. Durable construction Built from steel plates and tested to withstand a 81 kg load bearing capacity. This makes it appropriate for both industrial plumbing tasks and household pipe stress tests. Safety and depressurization Equipped with a pressure relief valve. During depressurization, the pressure relief hole must be aligned with the drain hole on the water tank to prevent water splashing or accidents. Clear pressure monitoring and performance range Easy to read pressure monitoring. Normal tap water pressure is 0.3 MPa; rise water pressure is 0.4 MPa. Water pipe pressure tests are generally conducted between 0.8 and 1 MPa. Household pipeline pressure test durations are typically 2 to 4 hours. 23 practical use scenarios After installing residential plumbing, perform a pressure test up to 1 MPa and run for 2 to 4 hours to verify leak performance. In commercial or multioccupancy buildings, test water supply lines for pressure integrity within the 0.8 to 1 MPa range to ensure system reliability. During maintenance or after pipe repairs, conduct a controlled depressurization test using the relief valve alignment procedure to safely verify continued integrity.