Feature:1. Using cross-roller guide rails, possess high accuracy and stable movement. Can be fixed to the applicable position with customers' accurate machinery or instruments2. Light weight, the main material is aluminum alloy, suitable for other built-in equipment3. The micrometer drive mode is ultra-accuracy, the rotating platform can accurately adjust the angle of the platform to the approximate position, and the thickness adjustment switch screw can fine-tune with the micrometer4. The sliding table can be applied to various production machinery with high accuracy or medium load, inspection device, accurate positioning and quantitative movement5. There are various types of sliding tables that can be matched with each other, such as single axes, dual axes, z axes, c axes, r axes, etc.6. Diversified feed methods such as coarse and fine movement handle/centimeter probe, feed screw, rack and pinion, with scale to manage the movement valueSpecification:Item Type: Manual Displacement PlatformMaterial: Aluminum alloyTable Diameter: Approx. 60mm / 2.4inMovement Mode: RS rotation R axesStroke: 360 Degree coarse adjustmentFine Adjustment: 5Load: 29.4N (3kgf)Minimum Scale: 2 DegreesConcentricity: 0.03mmTable Type: Manual sliding tableInstallation Method: 1. Use the countersunk holes on the base to install the platform. 2. Rotate the work surface to make the screw through holes and the countersunk head on the base concentric. 3.Then you can fix it with screws and repeat the left side, then the platform can use 4 countersunk holes fixed..Package List:1 x Manual Displacement PlatformNote:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.