설명
Specifications:
Condition: Brand New
Type: Car Reverse Parking Kit
Power Cable Length: approx. 0.8m
LCD Display Cable Length: approx. 5m
Sensor Cable Length: 2.3m per sensor (rear) /6.3m per sensor (front)
Rated Operating Voltage: 12V DC (9.6 ~ 16V DC wide voltage operation)
Working Current: 20 ~ 180mA
Detection Distance: 30CM250CM
Alarm Volume: 80dB
Working Temperature: -40 ~ +80
Ultrasonic Frequency: 40kHz 1kHz
Features:
Car radar collision avoidance system is used for car exercises, berths and other safety aids.
After the installation of four probe car, reversing, automatically start probing after obstacles.
4 probe installed in front of the car, when driving forward, when braking, start.
2.3Meter of cable comes with each probe censor.
When the brakes, the front of the probe automatically work, loose brakes, the probe automatically delay
about 10 seconds to stop working.
Heartbeat step by step display function, numbers, sounds step by step tips.
Microcomputer intelligent control, accurate figures show the distance between obstacles.
Anti-electromagnetic interference, the electronic system without any impact.
Probe with embedded installation, black-color configuration sensor compact, easy installation.
Alarm prompt way:
Voice prompts: The system uses three kinds of sound, mute, beep, English live voice mode switching
between the three. The closer the obstacle, the more rapid.
Light bar tips: the use of white color light bar, heart-based tips obstacle distance.
Digital tips: in the middle of the display, the obvious number of tips obstacle distance, accurate and clear at a glance.
Notice:
Please pay attention to the following issues during the installation process:
Wiring method: ABCD (rear sensor) EFGH (front sensor)
Installation height is about 50cm.
Do not press hard the middle of the sensors during installation.
Keep the sensors wire away to a heat source (such as a smoke exhaust pipe or an engine compartment).
The radar host has eight interfaces ABCDEFGH.And the host must be installed at the rear of the car like the
picture shows. When reversing, sensors ABCDEH working.FG does not work.When braking forward. GEFH working.
The monitor is not working when the vehicle is not in the state of braking and reversing
The red line connect ACC power is not for working.It is for braking delay.The working lines are the yellow
line connect Reversing light power and white line connect Braking light power.
Package Included:
1 x Control box
8 x Black parking sensors
1 x LCD display
1 x Power cable
1 x Drill
2 x Stickers
1 x User Manual
Note:
Other accessories demo in the picture is not included.
Actual colors may be a little different due to different monitors.
Please allow 1-5mm deviation due to manual measurement.
-
Fruugo ID:
192513996-410278505
-
EAN:
9402056604293
제품 안전 정보
아래에 설명된 이 제품과 관련된 제품 안전 정보를 참조하십시오.
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
제품 안전 라벨
안전 경고:
important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged. Usage Precautions Environment: Do not use in wet, damp, or flammable environments unless specified as safe for such conditions. Proper Operation: Follow all operating instructions carefully. Avoid improper handling or misuse. Power Source: Use only the recommended power supply or batteries. Do not exceed specified voltage or current ratings. Maintenance and Care Cleaning: Disconnect from power before cleaning. Use only manufacturer-recommended cleaning methods and solutions. Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures. Repairs: Do not attempt to disassemble or repair the product. Contact authorized service personnel for assistance. Specific Warnings Avoid Hazards: Keep the product away from sharp objects, water, and heat sources. In Case of Malfunction: If the product malfunctions or exhibits unusual behavior, discontinue use immediately and contact customer support. Disposal Instructions Recycling: Dispose of the product in accordance with local electronic waste disposal and recycling guidelines. Battery Disposal: Follow specific regulations for the safe disposal of batteries if included.
